DbSync

WARNING - This package modifies database tables. Use with extreme caution and back up databases before running.

Always perform a dry run (this is the default action) first before specifying the --execute (-e) option.

What is it?

DbSync is a tool for efficiently comparing and synchronising two or more remote MySQL database tables.

In order to do this without comparing every byte of data, the tool preforms a checksum (MD5, SHA1, CRC32)
over a range of rows on both the source and destination tables, and compares only the hash. If a block is found to have
an inconsistency, the tool performs a checksum on each half of the block, recursively (down to a minimum
block transfer size), until it finds the inconsistency.

Notes About Deletion

DbSync will only delete rows from the destination that no longer exist on the source when the --delete option is specified.
Use this option with extreme caution. Always perform a dry run first.

If you use DbSync to synchronise a table which has row deletions on the source without using the --delete option,
DbSync will find inconsistencies in any block with a deleted row on every run but will not be able to remove the rows from the target.

Installation

Via composer - run the following command in your project directory:

composer require mrjgreen/db-sync

Or use the packaged archive directly

wget https://github.com/mrjgreen/db-sync/raw/v3/db-sync.phar -O db-sync.phar
chmod a+x db-sync.phar

Optionally make the command available globally

sudo mv db-sync.phar /usr/bin/db-sync

Usage:
db-sync [options] <source> <target> <table>

Sync a mysql database table from one host to another using an efficient checksum algorithm to find differences.

Arguments:
  source                                     The source host ip to use.
  target                                     The target host ip to use.
  table                                      The fully qualified database table to sync.

Options:
  -b, --block-size=BLOCK-SIZE                The maximum block to use for when comparing. [default: 1024]
      --charset=CHARSET                      The charset to use for database connections. [default: "utf8"]
  -c, --columns=COLUMNS                      Columns to sync - all columns not "ignored" will be included....
  -C, --comparison=COMPARISON                Columns from the list of synced columns to use to create the...
  -f, --config-file=CONFIG-FILE              A path to a config.ini file from which to read values. [default: "dbsync.ini"]
      --delete                               Remove rows from the target table that do not exist in the source.
  -e, --execute                              Perform the data write on non-matching blocks.
  -h, --help                                 Show this usage information.
  -H, --hash                                 Specify the hash algorithm used to generate the comparison hash. [default: "md5"]
  -i, --ignore-columns=IGNORE-COLUMNS        Columns to ignore. Will not be copied or used to create the hash....
  -I, --ignore-comparison=IGNORE-COMPARISON  Columns to ignore from the hash. Columns will still be copied....
  -p, --password[=PASSWORD]                  The password for the specified user. Will be solicited on the tty if...
  -u, --user=USER                            The name of the user to connect with. [default: "USER"]
  -s, --transfer-size=TRANSFER-SIZE          The maximum copy size to use for when comparing. [default: 8]
      --target.user=TARGET.USER              The name of the user to connect to the target host with if different...
      --target.table=TARGET.TABLE            The name of the table on the target host if different to the source.
      --target.password=TARGET.PASSWORD      The password for the target host if the target user is specified....
      --where=WHERE                          A where clause to apply to the tables.
  -v, --verbose                              Enable verbose output.
  -q, --quiet                                Disable output, overrides "verbose" option.

Examples

Note - All of these commands will perform a “dry-run” only. To execute the insert/update statement against the target
database, you must specify the --execute (-e) option

Example 1

Sync the table web.customers from one host to another (non-standard port on target):

db-sync --user root --password mypass 127.0.0.1 111.222.3.44:13306 web.customers

Example 2

Sync the table web.customers from one host to another, deleting rows from the target that no longer exist on the source (using SHA1 hash for comparison):

db-sync --user root --password mypass --hash sha1 --delete 127.0.0.1 111.222.3.44 web.customers

Example 3

Sync the table web.customers from one host to another using different credentials:

db-sync --user root --password mypass --target.user admin --target.password password 127.0.0.1 111.222.3.44 web.customers:

Example 4

Sync only the email and name fields from the table web.customers:

NB. The primary key will automatically be included in the column set

db-sync --user root --password mypass 127.0.0.1 111.222.3.44 web.customers -c email -c name

Example 5

Sync every column except for the updated_at fields from the table web.customers:

db-sync --user root --password mypass 127.0.0.1 111.222.3.44 web.customers -i updated_at

Example 6

Sync every column from the table web.customers but only use the updated_at fields when calculating the hash:

Inconsistencies in other fields will not be detected. In the event of a hash inconsistency in fields which are
included, the excluded fields will still be copied to the target host.

db-sync --user root --password mypass 127.0.0.1 111.222.3.44 web.customers -C updated_at

Example 7

Sync every column from the table web.customers and use all fields except for the notes or info fields when calculating the hash:

Inconsistencies in excluded fields will not be detected. In the event of a hash inconsistency in fields which are included,
the excluded fields will still be copied to the target host.

This is especially useful for tables with long text fields that don’t change after initial insert, or which are associated
with an on update CURRENT_TIMESTAMP field. For large tables this can offer a big performance boost.

db-sync --user root --password mypass 127.0.0.1 111.222.3.44 web.customers -I notes -I info

Example 8

Sync the table web.customers to a table under a different name in a different database web_backup.customers_2:

db-sync --user root --password mypass --target.table web_backup.customers_2 127.0.0.1 111.222.3.44 web.customers

Example 9

Sync the table web.customers only including active records and delete records in the target table, that are no longer active:

db-sync --user root --password mypass 127.0.0.1 111.222.3.44:13306 web.customers --delete --where="active = 1"

Config File

To avoid having to specify options repeatedly, and to avoid exposing your password on the tty you can specify a config file.
By default DbSync will look for a file named dbsync.ini in the current working directory.

Example:

user=root
password=mypass
target.user=admin
target.password=myadminpass

Use library within project (non-commandline)

You can include the library within your project and use the components directly:

use \DbSync\DbSync;
use \DbSync\Transfer\Transfer;
use \DbSync\Hash\ShaHash;
use \DbSync\Table;
use \DbSync\ColumnConfiguration;

$sync = new DbSync(new Transfer(new ShaHash(), $blockSize, $transferSize));

$sync->setLogger(new YourPsrLogger());

$sync->dryRun(false);

$sync->delete(true);

$sourceTable = new Table($sourceConnection, $sourceDb, $sourceTable);
$targetTable = new Table($targetConnection, $targetDb, $targetTable);

// if you only want specific columns 
$columnConfig = new ColumnConfiguration($syncColumns, $ignoreColumns);

// if you only want to use specific columns for the comparison
$compareConfig = new ColumnConfiguration($compareColumns, $ignoreCompareColumns);

// optionally apply a where clause - this can be useful when sync-ing large tables, where
// you can make use of a column to rule out large portions of the data
// that you know haven't changed, such as columns with "on update CURRENT_TIMESTAMP" etc..
$sourceTable->setWhereClause(new WhereClause("column_name = ?", ['value']));
$targetTable->setWhereClause(new WhereClause("column_name > ?", ['value']));

$sync->sync($sourceTable, $targetTable, $columnConfig, $compareConfig);

Roadmap

• [x] 100% test coverage via full stack integration tests
• [x] Allow option to delete data from target where not present on the source
• [x] Use symfony console command for sync
• [ ] Option to re-try with back-off on lock wait timeouts
• [ ] Option to create missing tables on target
• [ ] Option to skip duplicate key errors
• [ ] Speed up initial sync of empty table - Maybe offer combination with other tool for full fast outfile based replacement

Requirements

PHP 5.4 or above
PDO MySQL Extension

License

DbSync is licensed under the MIT License - see the LICENSE file for details

Acknowledgments

• Inspiration for this project came from the Percona Tools pt-table-sync.