Low-level atomic operations for Swift
This package implements an atomics library for Swift, providing atomic operations for a variety of Swift types, including integers and pointer values. The goal is to enable intrepid developers to start building synchronization constructs directly in Swift.
Atomic operations aren’t subject to the usual exclusivity rules. The same memory location may be safely read and updated from multiple concurrent threads of execution, as long as all such access is done through atomic operations. For example, here is a trivial atomic counter:
import Atomics
import Dispatch
let counter = ManagedAtomic<Int>(0)
DispatchQueue.concurrentPerform(iterations: 10) { _ in
for _ in 0 ..< 1_000_000 {
counter.wrappingIncrement(ordering: .relaxed)
}
}
counter.load(ordering: .relaxed) // ⟹ 10_000_000
The only way to access the counter value is to use one of the methods provided by ManagedAtomic, each of which implement a particular atomic operation, and each of which require an explicit ordering value. (Swift supports a subset of the C/C++ memory orderings.)
Atomic values are fundamental to managing concurrency. However, they are far too low level to be used lightly. These things are full of traps. They are extremely difficult to use correctly – far trickier than, say, unsafe pointers.
The best way to deal with atomics is to avoid directly using them. It’s always better to rely on higher-level constructs, whenever possible.
This package exists to support the few cases where the use of atomics is unavoidable – such as when implementing those high-level synchronization/concurrency constructs.
The primary focus is to provide systems programmers access to atomic operations with an API design that emphasizes clarity over superficial convenience:
Each atomic operation is invoked in client code using a clear, unabbreviated name that directly specifies what that operation does. Atomic operations are never implicit – they are always clearly spelled out.
There is no default memory ordering, to avoid accidental (and costly) use of sequential consistency. (This is a surprisingly common issue in C/C++.)
Operations such as compare/exchange prefer to keep input values cleanly separated from results. There are no inout parameters.
To use Atomics in your own project, you need to set it up as a package dependency:
// swift-tools-version:5.9
import PackageDescription
let package = Package(
name: "MyPackage",
dependencies: [
.package(
url: "https://github.com/apple/swift-atomics.git",
.upToNextMajor(from: "1.2.0") // or `.upToNextMinor
)
],
targets: [
.target(
name: "MyTarget",
dependencies: [
.product(name: "Atomics", package: "swift-atomics")
]
)
]
)
The atomics implementation is inherently far more tightly coupled to the compiler than usual, so tagged versions of this package typically only support a narrow range of Swift releases:
| swift-atomics | Supported Swift Versions |
|---|---|
1.0.x |
5.3, 5.4, 5.5 |
1.1.x |
5.6, 5.7, 5.8 |
1.2.x |
5.7, 5.8, 5.9 |
main |
5.8, 5.9, unreleased snapshots of 5.10 and trunk |
Note that the main branch is not a tagged release, so its contents are inherently unstable. Because of this, we do not recommended using it in production. (For example, its set of supported Swift releases is subject to change without notice.)
The Swift Atomics package is source stable. The version numbers follow Semantic Versioning – source breaking changes to public API can only land in a new major version.
The public API of current versions of the swift-atomics package consists of non-underscored declarations that are marked public in the Atomics module.
By “underscored declarations” we mean declarations that have a leading underscore anywhere in their fully qualified name. For instance, here are some names that wouldn’t be considered part of the public API, even if they were technically marked public:
FooModule.Bar._someMember(value:) (underscored member)FooModule._Bar.someMember (underscored type)_FooModule.Bar (underscored module)FooModule.Bar.init(_value:) (underscored initializer)Interfaces that aren’t part of the public API may continue to change in any release, including patch releases.
Note that contents of the _AtomicsShims module explicitly aren’t public API. (As implied by its underscored module name.) The definitions therein may therefore change at whim, and the entire module may be removed in any new release – do not import this module directly. We also don’t make any source compatibility promises about the contents of the Utilities, Tests, Xcode and cmake subdirectories.
If you have a use case that requires using underscored APIs, please submit a Feature Request describing it! We’d like the public interface to be as useful as possible – although preferably without compromising safety or limiting future evolution.
Future minor versions of the package may introduce changes to these rules as needed.
We’d like this package to quickly embrace Swift language and toolchain improvements that are relevant to its mandate. Accordingly, from time to time, new versions of this package will require clients to upgrade to a more recent Swift toolchain release. (This allows the package to make use of new language/stdlib features, build on compiler bug fixes, and adopt new package manager functionality as soon as they are available.)
Requiring a new Swift release will only require a minor version bump.
For a detailed overview of the interfaces offered by this package, please see our API documentation.
The package implements atomic operations for the following Swift constructs, all of which conform to the public AtomicValue protocol:
Int, Int64, Int32, Int16, Int8)UInt, UInt64, UInt32, UInt16, UInt8)Bool)UnsafeRawPointer, UnsafeMutableRawPointer, UnsafePointer<T>, UnsafeMutablePointer<T>), along with their optional-wrapped forms (such as Optional<UnsafePointer<T>>)Unmanaged<T>, Optional<Unmanaged<T>>)DoubleWord type that consists of two UInt values, first and second, providing double-wide atomic primitivesRawRepresentable type whose RawValue is in turn an atomic type (such as simple custom enum types)AtomicReference protocol)Of particular note is full support for atomic strong references. This provides a convenient memory reclamation solution for concurrent data structures that fits perfectly with Swift’s reference counting memory management model. (Atomic strong references are implemented in terms of DoubleWord operations.) However, accessing an atomic strong reference is (relatively) expensive, so we also provide a separate set of efficient constructs (ManagedAtomicLazyReference and UnsafeAtomicLazyReference) for the common case of a lazily initialized (but otherwise constant) atomic strong reference.
All atomic operations exposed by this package are guaranteed to have lock-free implementations. However, we do not guarantee wait-free operation – depending on the capabilities of the target platform, some of the exposed operations may be implemented by compare-and-exchange loops. That said, all atomic operations map directly to dedicated CPU instructions where available – to the extent supported by llvm & Clang.
Atomic access is implemented in terms of dedicated atomic storage representations that are kept distinct from the corresponding regular (non-atomic) type. (E.g., the actual integer value underlying the counter above isn’t directly accessible.) This has several advantages:
While the underlying pointer-based atomic operations are exposed as static methods on the corresponding AtomicStorage types, we strongly recommend the use of higher-level atomic wrappers to manage the details of preparing/disposing atomic storage. This version of the library provides two wrapper types:
ManagedAtomic<T> generic class andUnsafeAtomic<T> generic struct.Both constructs provide the following operations on all AtomicValue types:
func load(ordering: AtomicLoadOrdering) -> Value
func store(_ desired: Value, ordering: AtomicStoreOrdering)
func exchange(_ desired: Value, ordering: AtomicUpdateOrdering) -> Value
func compareExchange(
expected: Value,
desired: Value,
ordering: AtomicUpdateOrdering
) -> (exchanged: Bool, original: Value)
func compareExchange(
expected: Value,
desired: Value,
successOrdering: AtomicUpdateOrdering,
failureOrdering: AtomicLoadOrdering
) -> (exchanged: Bool, original: Value)
func weakCompareExchange(
expected: Value,
desired: Value,
ordering: AtomicUpdateOrdering
) -> (exchanged: Bool, original: Value)
func weakCompareExchange(
expected: Value,
desired: Value,
successOrdering: AtomicUpdateOrdering,
failureOrdering: AtomicLoadOrdering
) -> (exchanged: Bool, original: Value)
Integer types come with additional atomic operations for incrementing or decrementing values and bitwise logical operations.
func loadThenWrappingIncrement(
by operand: Value = 1,
ordering: AtomicUpdateOrdering
) -> Value
func loadThenWrappingDecrement(
by operand: Value = 1,
ordering: AtomicUpdateOrdering
) -> Value
func loadThenBitwiseAnd(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func loadThenBitwiseOr(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func loadThenBitwiseXor(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func wrappingIncrementThenLoad(
by operand: Value = 1,
ordering: AtomicUpdateOrdering
) -> Value
func wrappingDecrementThenLoad(
by operand: Value = 1,
ordering: AtomicUpdateOrdering
) -> Value
func bitwiseAndThenLoad(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func bitwiseOrThenLoad(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func bitwiseXorThenLoad(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func wrappingIncrement(
by operand: Value = 1,
ordering: AtomicUpdateOrdering
)
func wrappingDecrement(
by operand: Value = 1,
ordering: AtomicUpdateOrdering
)
Bool provides select additional boolean operations along the same vein.
func loadThenLogicalAnd(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func loadThenLogicalOr(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func loadThenLogicalXor(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func logicalAndThenLoad(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func logicalOrThenLoad(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
func logicalXorThenLoad(
with operand: Value,
ordering: AtomicUpdateOrdering
) -> Value
For an introduction to the APIs provided by this package, for now please see the first version of SE-0282.
The current version of the Atomics module does not implement APIs for tagged atomics (see issue #1), although it does expose a DoubleWord type that can be used to implement them. (Atomic strong references are already implemented in terms of DoubleWord, although in their current form they do not expose any user-customizable bits.)
Swift Atomics is a standalone library separate from the core Swift project. We expect some of the atomics APIs may eventually get incorporated into the Swift Standard Library. If and when that happens such changes will be proposed to the Swift Standard Library using the established evolution process of the Swift project.
This library is licensed under the Swift License. For more information, see the Swift.org Community Guidelines, Contribution Guidelines, as well as the files LICENSE.txt, CONTRIBUTING.md and CODE_OF_CONDUCT.md at the root of this repository.
Swift Atomics uses GitHub issues to track bugs and enhancement requests. We use pull requests for development.
We have a dedicated Swift Atomics Forum where people can ask and answer questions on how to use or work on this package. It’s also a great place to discuss its evolution.
If you find something that looks like a bug, please open a Bug Report! Fill out as many details as you can.
To fix a small issue or make a tiny improvement, simply submit a PR with the changes you want to make. If there is an existing issue for the bug you’re fixing, please include a reference to it. Make sure to add tests covering whatever changes you are making.
For larger feature additions, it’s a good idea to discuss your idea in a new Feature Request or on the forum before starting to work on it. If the discussions indicate the feature would be desirable, submit the implementation in a PR, and participate in its review discussion.
This package defines a large number of similar-but-not-quite-the-same operations. To make it easier to maintain these, we use code generation to produce them.
A number of source files have a .swift.gyb extension. These are using a Python-based code generation utility called gyb which we also use within the Swift Standard Library (the name is short for Generate Your Boilerplate). To make sure the package remains buildable by SPM, the autogenerated output files are committed into this repository. You should not edit the contents of autogenerated subdirectories, or your changes will get overwritten the next time the code is regenerated.
To regenerate sources (and to update the inventory of XCTest tests), you need to manually run the script generate-sources.sh in the Utilities folder of this repository. This needs to be done every time you modify one of the template files.
In addition to gyb, the _AtomicsShims.h header file uses the C preprocessor to define trivial wrapper functions for every supported atomic operation – memory ordering pairing.
⚛︎︎