A block-based framework for building Bluetooth 4.0 Low Energy (aka Smart or LE) iOS and OS X applications using the CoreBluetooth API. Includes Deanna and DeannaMac, applications to communicate with a TI SensorTag for iOS and OS X respectively.
A block-based framework for building Bluetooth 4.0 Low Energy (aka Smart or LE) iOS 7 or OS X 10.9 applications using the CoreBluetooth API. Includes Deanna and DeannaMac, applications to communicate with a TI SensorTag for iOS and OS X respectively.
Transactions in Bluetooth LE (BLE) are two-phase (request-response) in nature: CoreBluetooth abstracts this protocol so that request behavior is separated from response behavior. The two phases are reconciled using a delegation pattern: the object initiating the request phase has a delegate object with a delegate method to handle the corresponding response phase. While functional, the delegation pattern can be cumbersome to use because the behavior for a two-phase transaction is split into two different locations in code.
A more convenient programming pattern is to use a callback block which is defined with the request. When the response is received, the callback block can be executed to handle it. The design intent of YmsCoreBluetooth is use Objective-C blocks to define response behavior to BLE requests. Such requests include:
The data object hierachy of CoreBluetooth can be described as such:
However the existing CoreBluetooth API does not map BLE requests to the data object hierarchy. For example connection to a CBPeripheral instance is accomplished from a CBCentralManager instance instead of from a CBPeripheral. Writes, reads, and setting the notification state of a CBCharacteristic are issued from a CBPeripheral instance, instead of from CBCharacteristic. YmsCoreBluetooth provides an API that more naturally maps operations to the data object hierarchy.
YMSCoreBluetooth defines container classes which map to the CoreBluetooth object hierarchy:
However, they differ from CoreBluetooth in that operations are done with respect to the object type:
The apps Deanna and DeannaMac are demonstration apps intended to illustrate the use of YmsCoreBluetooth. Both apps use YmsCoreBluetooth to characterize a TI SensorTag and provide controllability and observability of the six sensors on the device. It also has the capability to scan for other BLE devices.
Deanna has been recently changed (v 0.943) to support the graphic design contributions of Wayne Dahlberg.
In the following code sample, self is an instance of a subclass of YMSCBCentralManager.
__weak DEACentralManager *this = self;
[self scanForPeripheralsWithServices:nil
options:options
withBlock:^(CBPeripheral *peripheral, NSDictionary *advertisementData, NSNumber *RSSI, NSError *error) {
if (error) {
NSLog(@"Something bad happened with scanForPeripheralWithServices:options:withBlock:");
return;
}
NSLog(@"DISCOVERED: %@, %@, %@ db", peripheral, peripheral.name, RSSI);
[this handleFoundPeripheral:peripheral];
}];
In the following code sample, self is an instance of a subclass of YMSCBCentralManager and identifiers is an array of NSUUID instances that map to a peripheral that has been discovered by the iOS device.
[self retrievePeripheralsWithIdentifiers:identifiers];
Note - This API has changed for iOS7 due to the deprecation of [YMSCBCentralManager retrievePeripherals:withBlock:]
// I AM OLD CODE.
__weak DEACentralManager *this = self;
[self retrievePeripherals:peripheralUUIDs
withBlock:^(CBPeripheral *peripheral) {
[this handleFoundPeripheral:peripheral];
}];
In the following code sample, self is an instance of a subclass of YMSCBPeripheral. Note that in the callbacks, discovering services and characteristics are handled in a nested fashion:
- (void)connect {
// Watchdog aware method
[self resetWatchdog];
[self connectWithOptions:nil withBlock:^(YMSCBPeripheral *yp, NSError *error) {
if (error) {
return;
}
// Example where only a subset of services is to be discovered.
//[yp discoverServices:[yp servicesSubset:@[@"temperature", @"simplekeys", @"devinfo"]] withBlock:^(NSArray *yservices, NSError *error) {
[yp discoverServices:[yp services] withBlock:^(NSArray *yservices, NSError *error) {
if (error) {
return;
}
for (YMSCBService *service in yservices) {
if ([service.name isEqualToString:@"simplekeys"]) {
__weak DEASimpleKeysService *thisService = (DEASimpleKeysService *)service;
[service discoverCharacteristics:[service characteristics] withBlock:^(NSDictionary *chDict, NSError *error) {
[thisService turnOn];
}];
} else if ([service.name isEqualToString:@"devinfo"]) {
__weak DEADeviceInfoService *thisService = (DEADeviceInfoService *)service;
[service discoverCharacteristics:[service characteristics] withBlock:^(NSDictionary *chDict, NSError *error) {
[thisService readDeviceInfo];
}];
} else {
__weak DEABaseService *thisService = (DEABaseService *)service;
[service discoverCharacteristics:[service characteristics] withBlock:^(NSDictionary *chDict, NSError *error) {
for (NSString *key in chDict) {
YMSCBCharacteristic *ct = chDict[key];
//NSLog(@"%@ %@ %@", ct, ct.cbCharacteristic, ct.uuid);
[ct discoverDescriptorsWithBlock:^(NSArray *ydescriptors, NSError *error) {
if (error) {
return;
}
for (YMSCBDescriptor *yd in ydescriptors) {
NSLog(@"Descriptor: %@ %@ %@", thisService.name, yd.UUID, yd.cbDescriptor);
}
}];
}
}];
}
}
}];
}];
}
In the following code sample, self is an instance of a subclass of YMSCBService. All discovered characteristics are stored in [YMSCBService characteristicDict].
- (void)readDeviceInfo {
YMSCBCharacteristic *system_idCt = self.characteristicDict[@"system_id"];
__weak DEADeviceInfoService *this = self;
[system_idCt readValueWithBlock:^(NSData *data, NSError *error) {
NSMutableString *tmpString = [NSMutableString stringWithFormat:@""];
unsigned char bytes[data.length];
[data getBytes:bytes];
for (int ii = (int)data.length; ii >= 0;ii--) {
[tmpString appendFormat:@"%02hhx",bytes[ii]];
if (ii) {
[tmpString appendFormat:@":"];
}
}
NSLog(@"system id: %@", tmpString);
_YMS_PERFORM_ON_MAIN_THREAD(^{
this.system_id = tmpString;
});
}];
YMSCBCharacteristic *model_numberCt = self.characteristicDict[@"model_number"];
[model_numberCt readValueWithBlock:^(NSData *data, NSError *error) {
if (error) {
NSLog(@"ERROR: %@", error);
return;
}
NSString *payload = [[NSString alloc] initWithData:data encoding:NSStringEncodingConversionAllowLossy];
NSLog(@"model number: %@", payload);
_YMS_PERFORM_ON_MAIN_THREAD(^{
this.model_number = payload;
});
}];
}
In the following code sample, self is an instance of a subclass of YMSCBService. In this example, a write to the ‘config’ characteristic followed by a read of the ‘calibration’ characteristic is done.
- (void)requestCalibration {
if (self.isCalibrating == NO) {
__weak DEABarometerService *this = self;
YMSCBCharacteristic *configCt = self.characteristicDict[@"config"];
[configCt writeByte:0x2 withBlock:^(NSError *error) {
if (error) {
NSLog(@"ERROR: write request to barometer config to start calibration failed.");
return;
}
YMSCBCharacteristic *calibrationCt = this.characteristicDict[@"calibration"];
[calibrationCt readValueWithBlock:^(NSData *data, NSError *error) {
if (error) {
NSLog(@"ERROR: read request to barometer calibration failed.");
return;
}
this.isCalibrating = NO;
char val[data.length];
[data getBytes:&val length:data.length];
int i = 0;
while (i < data.length) {
uint16_t lo = val[i];
uint16_t hi = val[i+1];
uint16_t cx = ((lo & 0xff)| ((hi << 8) & 0xff00));
int index = i/2 + 1;
if (index == 1) self.c1 = cx;
else if (index == 2) this.c2 = cx;
else if (index == 3) this.c3 = cx;
else if (index == 4) this.c4 = cx;
else if (index == 5) this.c5 = cx;
else if (index == 6) this.c6 = cx;
else if (index == 7) this.c7 = cx;
else if (index == 8) this.c8 = cx;
i = i + 2;
}
this.isCalibrating = YES;
this.isCalibrated = YES;
}];
}];
}
}
One place where YmsCoreBluetooth does not use blocks to handle BLE responses is with characteristic notification updates. The reason for this is because such updates are asynchronous and non-deterministic. As such the handler method [YMSCBService notifyCharacteristicHandler:error:] must be implemented for any subclass of YMSCBService to handle such updates.
In the following code sample, self is an instance of a subclass of YMSCBService.
- (void)turnOn {
__weak DEABaseService *this = self;
YMSCBCharacteristic *configCt = self.characteristicDict[@"config"];
[configCt writeByte:0x1 withBlock:^(NSError *error) {
if (error) {
NSLog(@"ERROR: %@", error);
return;
}
NSLog(@"TURNED ON: %@", this.name);
}];
YMSCBCharacteristic *dataCt = self.characteristicDict[@"data"];
[dataCt setNotifyValue:YES withBlock:^(NSError *error) {
NSLog(@"Data notification for %@ on", this.name);
}];
_YMS_PERFORM_ON_MAIN_THREAD(^{
this.isOn = YES;
});
}
- (void)notifyCharacteristicHandler:(YMSCBCharacteristic *)yc error:(NSError *)error {
if (error) {
return;
}
if ([yc.name isEqualToString:@"data"]) {
NSData *data = yc.cbCharacteristic.value;
char val[data.length];
[data getBytes:&val length:data.length];
int16_t v0 = val[0];
int16_t v1 = val[1];
int16_t v2 = val[2];
int16_t v3 = val[3];
int16_t amb = ((v2 & 0xff)| ((v3 << 8) & 0xff00));
int16_t objT = ((v0 & 0xff)| ((v1 << 8) & 0xff00));
double tempAmb = calcTmpLocal(amb);
__weak DEATemperatureService *this = self;
_YMS_PERFORM_ON_MAIN_THREAD(^{
this.ambientTemp = @(tempAmb);
this.objectTemp = @(calcTmpTarget(objT, tempAmb));
});
}
}
Important: To let the UI components in the main thread know via KVO that a property has changed, you must update that property on the main thread. A convenience macro _YMS_PERFORM_ON_MAIN_THREAD which uses the GCD call dispatch_async() does just that:
#define _YMS_PERFORM_ON_MAIN_THREAD(block) dispatch_async(dispatch_get_main_queue(), block);
The callback pattern used by YmsCoreBluetooth uses a single callback to handle both successfull and failed responses. This is accomplished by including an error parameter. If an error object is not nil, then behavior to handle the failure can be implemented. Otherwise behavior to handle success is implemented.
^(NSError *error) {
if (error) {
// Code to handle failure
return;
}
// Code to handle success
}
The YmsCoreBluetooth framework is the set of files prefixed with YMSCB located in the directory YmsCoreBluetooth.
The files for the iOS application Deanna are prefixed with DEA and are located in the directory Deanna.
The files for the OS X application DeannaMac are prefixed with DEM and are located in the directory DeannaMac.
To better understand how YmsCoreBluetooth works, it is recommended to first read the source of the following BLE service implementations:
Then the BLE peripheral implementation of the TI SensorTag:
Then the application service which manages all known peripherals:
The Class Hierarchy is very instructive in showing the relationship of the above classes to the YmsCoreBluetooth framework.
Learn how to write your own Bluetooth LE service by reading the example of how its done for the TI SensorTag in the Tutorial.
While YmsCoreBluetooth is quite functional, there’s always room for improvement. Please submit any questions or issues to the GitHub project for YmsCoreBluetooth.
I’m working on publishing a list of projects using YmsCoreBluetooth. If you’re not shy about this, please let me know and thank you for using YmsCoreBluetooth! And even if you are shy, please let me know and I promise full discretion.
Code tested on:
Removed support for now obsolete iOS 9 CoreBluetooth delegate methods:
Administrative changes:
Added methods to support BLE addressing:
Tested Mac Environment:
View Prior Change List
Copyright 2013-2014 Yummy Melon Software LLC
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Author: Charles Y. Choi <[email protected]>